Aqara
Aqara FP2: Home Assistant Setup, Matter Support, Zones, and Compatibility
Aqara FP2 compatibility profile for Home Assistant, Apple Home, Matter expectations, zone setup, local-control limits, alternatives, and automation planning.
Short answer
Aqara FP2 is strongest when you need room presence and zone-based automations, especially with Home Assistant. The main caveat is that zone setup, calibration, and some advanced behavior stay tied to the Aqara app, and FP2 should not be treated as a native Matter or Thread sensor.
Verified compatibility conclusion
FP2 uses 2.4 GHz Wi-Fi and does not require an Aqara hub. Home Assistant can discover it through the local HomeKit Device integration after Aqara Home setup; it is not a native Matter or Thread sensor.
- Verified on
- 2026-07-19
- Evidence level
- Official product documentation + Home Assistant integration documentation; not physically tested by SmartHomeCompat
Supported and unsupported features
| Feature | Verdict | What it means |
|---|---|---|
| Room presence in Home Assistant | Supported | Exposed through the local HomeKit Device path when pairing and LAN discovery are correct. |
| Multiple detection zones | Supported | Zones created in Aqara Home can appear as separate sensors in Home Assistant. |
| Zone creation and calibration in Home Assistant | Not supported | Create and calibrate zones in Aqara Home, then consume the resulting entities in Home Assistant. |
| Native Matter support | Not supported | Do not buy FP2 expecting Matter commissioning or a Thread Border Router requirement. |
| Local automation after setup | Supported | The HomeKit protocol is local; Aqara Home remains useful for configuration, firmware, and calibration. |
Compatibility matrix
| Platform | Status | Required hubs | Page |
|---|---|---|---|
| Home Assistant | Works | No extra hub identified | Open detailed guide |
| Apple Home | Works | No extra hub identified | Included on this page |
| Google Home | Partially compatible | No extra hub identified | Included on this page |
| Alexa | Partially compatible | No extra hub identified | Included on this page |
| Aqara | Works | No extra hub identified | Included on this page |
Connectivity & Matter details
| Matter connection | Not a Matter device |
|---|---|
| Thread role | Not a Thread device |
| Needs Thread border router | No |
| Local control | Partial (some cloud) |
| Required hubs | No extra hub identified |
Known limitations
- Advanced zones are configured in the Aqara app
- Google Home and Alexa support is usually indirect
Automation fit
Use this to decide whether the device is a good trigger, action, or support device for a real automation scene, and whether it is reliable enough for critical automations.
Works as trigger
yes
Works as action
no
Local readiness
medium
Cloud dependency
partial
Trigger reliability
medium
Maintenance risk
medium
Network sensitivity
medium
Critical automation
caution
- Trigger type
- state
- Expected entities
- presence, zone occupancy, illuminance
- Advanced zones and calibration remain Aqara-app dependent.
- Use delay-off logic so brief zone changes do not turn lights off too quickly.
- Avoid using FP2 as the only intrusion or alarm trigger.
- Aqara app for zones and calibration
- Home Assistant local path
- controllable lights
Avoid using this for
- security-critical intrusion detection
- simple PIR replacement
- native Matter over Thread expectation
Recommended fallback
- manual light switch override
- secondary motion sensor for simple rooms
- notification when FP2 entities become unavailable
Local control vs cloud or app dependency
| Connection path | Local behavior | Cloud or app dependency |
|---|---|---|
| Home Assistant HomeKit Device | Local LAN control and sensor updates | Aqara Home still handles initial Wi-Fi setup, zones, calibration, and firmware |
| Apple Home / HomeKit | Local HomeKit accessory path | Apple home hub is only needed for remote access and always-on automations |
| Google Home or Alexa | Platform exposure is more limited | Normally depends on Aqara account linking and Aqara-managed configuration |
Hub, bridge, and firmware requirements
FP2 uses 2.4 GHz Wi-Fi and does not require an Aqara hub. Home Assistant can discover it through the local HomeKit Device integration after Aqara Home setup; it is not a native Matter or Thread sensor.
Update FP2 in Aqara Home before troubleshooting. Aqara does not publish one universal minimum firmware for every region and integration path, so record the installed version rather than relying on an invented cutoff.
Common setup and troubleshooting guides
Evidence sources
Compatibility changes with firmware, region, and platform releases. These sources were checked on 2026-07-19.
Need a final setup and reliability path?
$1.99 setup + reliability report
Send your scene, devices, hubs, and target ecosystem. We will return what to connect, what hub is missing, which features may not work, reliability risks, fallback checks, and what to buy or avoid.
Related setup paths
FAQ
Is Aqara FP2 good for Home Assistant?
Yes, if you need presence or zone-based automations and accept that setup, calibration, and advanced zone editing may remain in the Aqara app.
Does Aqara FP2 support Matter?
This profile treats FP2 as not having native Matter support. Avoid buying it expecting a native Matter over Thread sensor path.
What is the best Aqara FP2 alternative?
For simpler motion automations, Eve Motion or Aqara Motion Sensor P1 can be easier. For room-level presence and zones, FP2 is still the more specialized option.
Feedback
Help improve this compatibility data
Smart home compatibility changes quickly. Send a report, request a missing device, flag information that needs another review, or tell us if a paid setup diagnosis would save you time.
Describe your devices, hubs, blocker, reliability risk, and the report output that would save you time.
Tell us which device, hub, bridge, protocol, or ecosystem should be added next.
Flag outdated, incomplete, or unclear setup guidance so it can be reviewed.
Choose a gateway, bridge, interface, or conversion path for KNX, BACnet, Modbus, DALI, Matter, Zigbee, Z-Wave, MQTT, or Home Assistant.