Short answer
August Smart Lock Pro 4th Gen is not supported with Aqara. For most users, the practical path is to use the vendor integration for aqara if available.
Compatibility summary
| Device | August Smart Lock Pro 4th Gen |
|---|---|
| Platform | Aqara |
| Status | Not supported |
| Required hubs | No extra hub identified |
| Protocols | Z-Wave, Bluetooth, HomeKit |
| Confidence | medium |
How to connect
- Use the vendor integration for Aqara if available.
- If direct support is missing, bridge through Home Assistant or another controller.
- Confirm feature support before buying.
What may not work
- Z-Wave requires Z-Wave JS USB controller in Home Assistant
- No native Matter support — cloud required for remote access without Apple Home hub
- Google Home and Alexa require August Connect bridge for cloud control
Troubleshooting checklist
- Confirm the exact product SKU and firmware version.
- Keep the target controller and phone on the same network during pairing.
- If Matter pairing fails, factory reset the device and retry with a fresh setup code.
- Check whether the hub is only acting as a bridge or also as a Thread border router.
FAQ
Does August Smart Lock Pro 4th Gen work with Aqara?
Not supported. The best path is: Use the vendor integration for Aqara if available. If direct support is missing, bridge through Home Assistant or another controller. Confirm feature support before buying.
Does August Smart Lock Pro 4th Gen need a hub?
No extra hub was identified for this connection path, but controller requirements can still depend on your home setup.
What features may be missing in Aqara?
Z-Wave requires Z-Wave JS USB controller in Home Assistant No native Matter support — cloud required for remote access without Apple Home hub Google Home and Alexa require August Connect bridge for cloud control