Short answer
Aqara Presence Sensor FP2 is works with Aqara. For most users, the practical path is to connect fp2 directly to 2.4 ghz wi-fi in aqara home.
Compatibility summary
| Device | Aqara Presence Sensor FP2 |
|---|---|
| Platform | Aqara |
| Status | Works |
| Required hubs | No extra hub identified |
| Hub risk | none |
| Protocols | Wi-Fi, HomeKit, Aqara Cloud |
| Confidence | high |
| Tested by us | No |
Hub requirement diagnosis
No extra hub is modeled for the primary path, but your ecosystem controller still matters.
How to connect
- Connect FP2 directly to 2.4 GHz Wi-Fi in Aqara Home.
- Calibrate room edges, entrances, interference zones, and detection zones.
- Use Aqara Home for firmware and advanced sensor configuration.
What may not work
- Zone creation, calibration, firmware updates, and some advanced settings remain in Aqara Home.
- FP2 is not a native Matter or Thread device.
Verification and evidence
- Verified on
- 2026-07-19
- Evidence level
- Official product documentation + Home Assistant integration documentation; not physically tested by SmartHomeCompat
Update FP2 in Aqara Home before troubleshooting. Aqara does not publish one universal minimum firmware for every region and integration path, so record the installed version rather than relying on an invented cutoff.
Troubleshooting checklist
- Confirm FP2 works in Aqara Home and record its firmware version before changing integrations.
- Keep FP2 and the target controller reachable on the same LAN; check mDNS and VLAN rules if discovery fails.
- A HomeKit accessory can be paired to only one HomeKit controller at a time; remove the old controller pairing without factory-resetting first.
- After changing Aqara zones, reload the integration or restart Home Assistant before rebuilding entities.
Need a final setup and reliability path?
$1.99 setup + reliability report
Send your scene, devices, hubs, and target ecosystem. We will return what to connect, what hub is missing, which features may not work, reliability risks, fallback checks, and what to buy or avoid.
FAQ
Does Aqara Presence Sensor FP2 work with Aqara?
Works. The best path is: Connect FP2 directly to 2.4 GHz Wi-Fi in Aqara Home. Calibrate room edges, entrances, interference zones, and detection zones. Use Aqara Home for firmware and advanced sensor configuration.
Does Aqara Presence Sensor FP2 need a hub?
No extra hub was identified for this connection path, but controller requirements can still depend on your home setup.
What features may be missing in Aqara?
Zone creation, calibration, firmware updates, and some advanced settings remain in Aqara Home. FP2 is not a native Matter or Thread device.