Zigbee reliability
Find why Zigbee devices go unavailable before you re-pair everything
Check coordinator placement, router coverage, Aqara route sensitivity, battery devices, last_seen, LQI, recent updates, and Wi-Fi channel risk. The output is a repair order, not just a network map.
Question-based Zigbee diagnosis
High mesh risk
- Coordinator is plugged directly into the host; USB 3.0, metal cases, and power noise often hurt Zigbee reliability.
- No known mains-powered Zigbee routers selected; battery sensors may be too far from a strong route.
- Aqara sensors can be sensitive to route quality and some router devices.
- Wi-Fi and Zigbee channel overlap has not been ruled out.
- Without last_seen or recent route data, it is harder to separate true offline devices from sleepy sensors.
- Move the coordinator to a short USB extension cable away from the host, router, metal, and USB 3.0 ports.
- Add one known-good mains-powered Zigbee router between the coordinator and the weak area.
- Pair Aqara sensors near the intended router and watch last_seen over 24 hours before changing channels.
- Record Wi-Fi 2.4 GHz and Zigbee channels, then separate them deliberately instead of changing both blindly.
- Change one variable at a time and observe for a full day.
Continue this mesh diagnosis
Check compatible coordinators
Review Home Assistant and Zigbee coordinator setup paths before replacing hardware.
Request a setup and reliability report
Send your stack, symptoms, and devices for a concise diagnosis before buying routers or hubs.
Check device compatibility
Confirm whether a device is better through ZHA, Zigbee2MQTT, vendor bridge, or Matter.
Share or save this result
Copy the current setup URL or a concise diagnosis summary.
Feedback
Help improve this compatibility data
Smart home compatibility changes quickly. Send a report, request a missing device, flag information that needs another review, or tell us if a paid setup diagnosis would save you time.
Describe your devices, hubs, blocker, reliability risk, and the report output that would save you time.
Tell us which device, hub, bridge, protocol, or ecosystem should be added next.
Flag outdated, incomplete, or unclear setup guidance so it can be reviewed.
Choose a gateway, bridge, interface, or conversion path for KNX, BACnet, Modbus, DALI, Matter, Zigbee, Z-Wave, MQTT, or Home Assistant.